bigbuzz12. Tried them but still nothing, ***** electric buttons, and no you can't hear it unlocking or locking it worked fine up until last Friday, and they doesn't seem to be away to get in other than go through the back seats, but then it still probably won't open from the inside, it's the mondeo hatch back 58 plate if that helps. Hi all. On a cold start up I have a random rattling/knocking noise coming from the engine. No rhythm to it very random/erratic knocking noise. No noises on the move just on a cold start up. It also disappears when I press the clutch which worries me, everything works fine drives like a dream. Some days it won’t do it, but more often than not to do fix , engine off , disconnect circlip that connects actuator arm from turbo to electronic actuator, with a pair of pliers or grips move arm forwards and backwards quite hard and fast until it frees itself, should only take 20 secs.. spray arm with lots of wd40. reconnect arm to actuator ,insert circlip to hold. Ford Mondeo Mk4 (2007 - 2013) 6th keep it in 4th with 3500 revs for a while.It cleans out the junk and forces a regen to start. Mondeo MK4 2.2 TDCI Titanium X. 2.0 tdci won't start. 56 plate, had £10 petrol by mistake, drove aprx 10 mile, got home was running rough, got as much petrol out as possible filled with £40 diesel, changed filter, was starting 1st time but very smokey and rough, no response from accelerator pedal for aprx 2 mins when first started every time, but would then idle rough and This can happen at startup or during a drive. Issue 2: 1 hour mode while car is running. This is a more consistent problem. Engine running, turn the stereo on and 1 hour mode flashes up. This happens regardless of the date and time showing or not showing. Issue 3: Distorted sound through the Speakers from radio play and CD play. Ford Model: 2009 MK4 Mondeo 1.8 TDCI. Ford Year: 2009. UK/Ireland Location: Cork. Posted July 10, 2019. Hi All, I am having a starting issue with my 2009 1.8 TDCI Mondeo. The car used to be a right pig to start (used to take up to 11 times waiting for the heater/glow plug light to go out and then cranking the car over), and last week let me Hi, I have a 2008 2.2 TDCI Ford SMax PSA variant that won't start after engine swap. Symptoms are Almost no fuel rail pressure starts at 12 and reaches a max of 24 when monitored with Snap-on diags. A … read more yyQb.